Home › ENGINE ยท 3UR-FE › ENGINE MECHANICAL › REAR ENGINE MOUNTING

REAR ENGINE MOUNTING > REMOVAL

for Preparation Click here



1. SUPPORT AUTOMATIC TRANSMISSION ASSEMBLY


    A163801E01
  1. Support the transmission with a transmission jack. Lift the transmission slightly from the crossmember.



2. REMOVE NO. 3 FRAME CROSSMEMBER SUB-ASSEMBLY


    A163809E01
  1. Remove the 4 rear engine mounting insulator bolts.



    A163810E01
  1. Remove the 4 nuts, 4 washers, 4 bolts and crossmember.



3. REMOVE REAR NO. 1 ENGINE MOUNTING INSULATOR


    A163811E01
  1. Remove the 4 bolts and mounting insulator from the transmission.

  1. for 4WD:
    Remove the bolt and mounting heat insulator.