AIR SWITCHING VALVE > INSPECTION |
| 1. INSPECT AIR SWITCHING VALVE ASSEMBLY |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 - 5 | 20°C (68°F) | 4.5 to 5.5 Ω |
| 1 - Body ground | Always | 10 kΩ or higher |
| 5 - Body ground |
![]() |
Check operation of the air switching valve.
Check that air does not flow from port A to port B.
![]() |
Apply battery voltage across terminals 1 and 5.
Check that air flows from port A to port B.
If the result is not as specified, replace the air switching valve.