LIGHTING SYSTEM > CUSTOMIZE PARAMETERS |
| CUSTOMIZING FUNCTION WITH TECHSTREAM |
Connect the Techstream to the DLC3.
Turn the ignition switch ON.
Turn the Techstream on.
Enter the following menus: Customize Setting.
Select the setting by referring to the table below.
| Display | Default | Contents | Setting |
| I/L ON / ACC OFF | ON | Illuminates light when ignition switch turned to ACC (Room light illuminated when interior light switch set to DOOR) | ON / OFF |
| Lighting Time | 15s | Changes illumination duration after door closure (It will quickly fade out when turning ignition switch ON) | 7.5s / 15s / 30s |
| I/L ON / Unlock | ON | Function to light up room light when unlocking with door key cylinder (Room light illuminated when interior light switch set to DOOR) | ON / OFF |
| Light OFF Delay | 30s | Function to continue illuminating headlight for certain period of time after closing all doors with ignition switch turned from ON to OFF under condition that light control switch is at HEAD or AUTO with the headlight ON | OFF / 30s / 60s / 90s |
| Sensitivity | NORMAL | Function to adjust sensitivity of lighting illumination*1 | LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2 |
| Disp Ex ON Sen | NORMAL | Changes brightness when lowering lights such as combination meter indicator light, A/C indicator light, and clock light*2 | LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2 |
| Disp Ex OFF Sen | NORMAL | Changes brightness when canceling lowering lights such as combination meter indicator light, A/C indicator light, and clock light*3 | LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2 |
| Lighting brightness | ![]() | ||||
| Setting | DARK2 | DARK1 | NORMAL | LIGHT1 | LIGHT2 |
| Brightness when lowering the lights | ![]() | ||||
| Setting | DARK2 | DARK1 | NORMAL | LIGHT1 | LIGHT2 |
| Brightness when canceling the lowering of the lights | ![]() | ||||
| Setting | DARK2 | DARK1 | NORMAL | LIGHT1 | LIGHT2 |