Home › BODY › EXTERIOR › REAR BODY SIDE PANEL PROTECTOR

REAR BODY SIDE PANEL PROTECTOR > REMOVAL

for Preparation Click here



1. REMOVE REAR BODY SIDE PANEL PROTECTOR LH


  1. for Standard Deck:
    Remove the rear body side panel protector.

    1. Apply protective tape to the outer circumference of the protector.



    2. Using a moulding remover, detach the 24 clips and remove the protector.


      B162793E01



  1. for Long Deck:
    Remove the rear body side panel protector.

    1. Apply protective tape to the outer circumference of the protector.



    2. Using a moulding remover, detach the 28 clips and remove the protector.


      B162791E01



  1. for CrewMax:
    Remove the rear body side panel protector.

    1. Apply protective tape to the outer circumference of the protector.



    2. Using a moulding remover, detach the 20 clips and remove the protector.


      B168221E04



2. REMOVE REAR BODY SIDE PANEL PROTECTOR RH

HINT:
Use the same procedures described for the LH side.