Home › BODY › SEAT › FRONT SEAT ASSEMBLY (for Fold Down Seat Type)

FRONT SEAT ASSEMBLY (for Fold Down Seat Type) > DISASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.



1. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH


B165802
  1. Lift the reclining adjuster release handle.

  1. Using a screwdriver, detach the claw and remove the reclining adjuster release handle.

    HINT:
    Tape the screwdriver tip before use.



2. REMOVE FRONT SEAT CUSHION SHIELD RH


    B165523E01
  1. Remove the hog rings and rubber bands of the seatback cover from the seat frame.



    B165809E01
  1. Remove the 2 screws.

  1. Detach the 3 claws in the order shown in the illustration, and then remove the cushion shield.



3. REMOVE INNER FRONT SEAT CUSHION SHIELD RH


B165805E01
  1. Remove the screw.

  1. Detach the 3 claws in the order shown in the illustration, and then remove the cushion shield.



4. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH
  1. Driver Side:
    Disconnect the 2 connectors and detach the 4 clamps.

  1. Passenger Side:
    Disconnect the connector and detach the clamp.



    B166598
  1. Remove the nut and front seat inner belt.



5. REMOVE FRONT SEAT CUSHION COVER WITH PAD RH


    B165806
  1. Using a clip remover, remove the 2 clips.



    B165526E01
  1. Bend the 2 seat frame claws upward.

  1. Detach the hooks and remove the seat cushion cover with pad.



6. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER RH


B166348E01
  1. Remove the hog rings and seat cushion cover.



7. REMOVE FRONT SEAT HEADREST ASSEMBLY RH


8. REMOVE FRONT SEATBACK LOCK HANDLE LH


B165544
  1. Using a screwdriver, remove the seatback lock handle as shown in the illustration.

    HINT:
    Tape the screwdriver tip before use.



9. REMOVE FRONT SEATBACK LOCK HANDLE RH


B166548
  1. Using a screwdriver, remove the seatback lock handle as shown in the illustration.

    HINT:
    Tape the screwdriver tip before use.



10. REMOVE FRONT SEATBACK SHIELD LH


B165545
  1. Remove the screw.

  1. Detach the 2 claws and remove the seatback shield.



11. REMOVE FRONT SEATBACK SHIELD RH
  1. Remove the screw.

  1. Detach the 2 claws and remove the seatback shield.



    B165546
  1. Disconnect the airbag wire harness from the seatback shield.



12. REMOVE FRONT SEATBACK ASSEMBLY RH


    B165547
  1. Disconnect the airbag wire harness from the seat frame.



    B165548
  1. Remove the 4 bolts and seatback.



13. REMOVE FRONT SEATBACK BOARD


B165549E01
  1. Detach the 2 clips and 2 hooks, and then remove the seatback board.



14. REMOVE FRONT SEATBACK LOCK SUB-ASSEMBLY LH


B165550
  1. Remove the 2 bolts and seatback lock.



15. REMOVE FRONT SEATBACK LOCK SUB-ASSEMBLY RH


B166555
  1. Remove the 2 bolts and seatback lock.



16. REMOVE FRONT SEATBACK LOCK HANDLE ROD


17. REMOVE FRONT SEAT HINGE COVER LH


B165551
  1. Detach the 2 claws and remove the seat hinge cover.



18. REMOVE FRONT SEAT HINGE COVER RH
  1. Detach the 2 claws and remove the seat hinge cover.



19. REMOVE FRONT SEATBACK COVER WITH PAD RH


    B165552
  1. Remove the nut and disconnect the seatback cover bracket from the seatback spring.



    B165553E01
  1. Remove the hog rings.



    B165554E01
  1. Remove the hog rings.



    B165529
  1. Detach the 4 claws and remove the 2 headrest supports.

  1. Remove the seatback cover with pad.



20. REMOVE SEPARATE TYPE FRONT SEATBACK COVER RH


    B165555E01
  1. Remove the hog rings and seatback cover wires.



    B165535
  1. Disconnect the seatback cover bracket from the seatback pad.



    B165556E01
  1. Remove the hog rings and seatback cover from the seatback pad.



21. REMOVE RECLINING ADJUSTER INSIDE COVER LH


B165537
  1. Remove the screw and reclining adjuster inside cover.



22. REMOVE RECLINING ADJUSTER INSIDE COVER RH
  1. Remove the screw and reclining adjuster inside cover.



23. REMOVE RECLINING ADJUSTER INSIDE COVER LH


B165557
  1. Remove the screw.

  1. Detach the claw and remove the reclining adjuster inside cover.



24. REMOVE RECLINING ADJUSTER INSIDE COVER RH
  1. Remove the screw.

  1. Detach the claw and remove the reclining adjuster inside cover.



25. REMOVE LOWER FRONT SEAT CUSHION SHIELD LH


B165539
  1. Using a screwdriver, detach the claw and remove the seat cushion shield.

    HINT:
    Tape the screwdriver tip before use.



26. REMOVE LOWER FRONT SEAT CUSHION SHIELD RH
  1. Using a screwdriver, detach the claw and remove the seat cushion shield.

    HINT:
    Tape the screwdriver tip before use.



27. REMOVE OCCUPANT CLASSIFICATION ECU


B165540
  1. Disconnect the 2 ECU connectors.

  1. Using a screwdriver, detach the claw and remove the ECU.

    HINT:
    Tape the screwdriver tip before use.



28. REMOVE FRONT SEAT WIRE RH