Home › BODY › SEAT › FRONT SEAT ASSEMBLY (for Fold Down Seat Type)

FRONT SEAT ASSEMBLY (for Fold Down Seat Type) > REASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.



1. INSTALL FRONT SEAT WIRE RH


2. INSTALL OCCUPANT CLASSIFICATION ECU


B165540
  1. Attach the claw to install the ECU.

  1. Connect the 2 ECU connectors.



3. INSTALL LOWER FRONT SEAT CUSHION SHIELD RH


B166418
  1. Attach the claw to install the cushion shield.



4. INSTALL LOWER FRONT SEAT CUSHION SHIELD LH
  1. Attach the claw to install the cushion shield.



5. INSTALL RECLINING ADJUSTER INSIDE COVER RH


B165557
  1. Attach the claw to install the reclining adjuster inside cover.

  1. Install the screw.



6. INSTALL RECLINING ADJUSTER INSIDE COVER LH
  1. Attach the claw to install the reclining adjuster inside cover.

  1. Install the screw.



7. INSTALL RECLINING ADJUSTER INSIDE COVER RH


B165537
  1. Install the reclining adjuster inside cover with the screw.



8. INSTALL RECLINING ADJUSTER INSIDE COVER LH
  1. Install the reclining adjuster inside cover with the screw.



9. INSTALL SEPARATE TYPE FRONT SEATBACK COVER RH


B166419E01
  1. Using hog ring pliers, install the seatback cover to the seatback pad with new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, avoid wrinkling the cover.



    B166411
  1. Connect the seatback cover bracket to the seatback pad.



    B166420E01
  1. Install the seatback cover wires.

  1. Using hog ring pliers, install new hog rings to the seatback pad.



10. INSTALL FRONT SEATBACK COVER WITH PAD RH
  1. Install the seatback cover with pad to the seatback spring.



    B165529
  1. Attach the 4 claws to install the 2 headrest supports.



    B166421E01
  1. Using hog ring pliers, install new hog rings to the seatback spring.



    B166422E01
  1. Using hog ring pliers, install new hog rings to the seatback spring.



    B165552
  1. Connect the seatback cover bracket to the seatback spring and install the nut.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

    CAUTION:
    After the seatback trim cover is assembled, make sure the side airbag strap is not twisted.

  1. Using hog ring pliers, install new hog rings to the seatback cover.



11. INSTALL FRONT SEAT HINGE COVER RH


B165551
  1. Attach the 2 claws to install the hinge cover.



12. INSTALL FRONT SEAT HINGE COVER LH
  1. Attach the 2 claws to install the hinge cover.



13. INSTALL FRONT SEATBACK LOCK SUB-ASSEMBLY RH


B166555
  1. Install the seatback lock with the 2 bolts.

    Torque:
    43 N*m{ 438 kgf*cm , 32 ft.*lbf }



14. INSTALL FRONT SEATBACK LOCK HANDLE ROD


B165799
  1. Install the seatback lock handle rod.

    NOTICE:
    Install the rod as shown in the illustration.



15. INSTALL FRONT SEATBACK LOCK SUB-ASSEMBLY LH


B165550
  1. Install the seatback lock with the 2 bolts.

    Torque:
    43 N*m{ 438 kgf*cm , 32 ft.*lbf }

    NOTICE:
    Connect the rod and seatback lock before installing the bolts.



16. INSTALL FRONT SEATBACK BOARD


B166549E01
  1. Attach the 2 hooks to install the seatback board, and then attach the 2 clips.



17. INSTALL FRONT SEATBACK ASSEMBLY RH


B165548
  1. Install the seatback with the 4 bolts.

    Torque:
    43 N*m{ 438 kgf*cm , 32 ft.*lbf }



    B165547
  1. Connect the airbag wire harness to the seat frame.



18. INSTALL FRONT SEATBACK SHIELD RH


    B165546
  1. Connect the airbag wire harness to the seatback shield.



    B165545
  1. Attach the 2 claws to install the seatback shield.

  1. Install the screw.



19. INSTALL FRONT SEATBACK SHIELD LH
  1. Attach the 2 claws to install the seatback shield.

  1. Install the screw.



20. INSTALL FRONT SEATBACK LOCK HANDLE RH


B165808


21. INSTALL FRONT SEATBACK LOCK HANDLE LH


22. INSTALL FRONT SEAT HEADREST ASSEMBLY RH


23. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER RH


B166423E01
  1. Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, avoid wrinkling the cover.



24. INSTALL FRONT SEAT CUSHION COVER WITH PAD RH


    B165526E02
  1. Attach the hooks to install the seat cushion cover with pad.

  1. Bend the 2 seat frame claws downward.



    B165806
  1. Install the 2 clips.



25. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH


B166599E01
  1. Install the front seat inner belt with the nut.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the front seat inner belt to overlap the protruding part of the front seat adjuster.

  1. Driver Side:

    1. Connect the 2 connectors and attach the 4 clamps.

  1. Passenger Side:
    Connect the connector and attach the clamp.



26. INSTALL INNER FRONT SEAT CUSHION SHIELD RH


B166414E01
  1. Attach the 3 claws in the order shown in the illustration, and install the cushion shield.

  1. Install the screw.



27. INSTALL FRONT SEAT CUSHION SHIELD RH


B166413E01
  1. Attach the 3 claws in the order shown in the illustration, and install the cushion shield.

  1. Install the 2 screws.



    B165523E02
  1. Using hog ring pliers, install the rubber band of the seatback cover to the seat frame with new hog rings.



28. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH


B165803
  1. Attach the claw to install the reclining adjuster release handle.