Home › BODY › SEAT › FRONT SEAT ASSEMBLY (for Center Seat)

FRONT SEAT ASSEMBLY (for Center Seat) > DISASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the center seat cushion frame and center sub-seatback support may injure your hands.



1. REMOVE CENTER SEATBACK PANEL


B165566
  1. Detach the 4 claws and 4 clips, and remove the center seatback panel.



    B166347
  1. for Double Cab:

    1. Remove the 2 screws.

    2. Detach the 4 clips and remove the center seatback panel.

    3. Disconnect the power outlet socket connector.



    B169093
  1. for CrewMax:

    1. Detach the 4 claws and 4 clips, and remove the center seatback panel.

    2. Disconnect the 2 connectors.



2. REMOVE REAR POWER OUTLET SOCKET ASSEMBLY (for Double Cab)


B166901E01
  1. Using a screwdriver, detach the claw and remove the power outlet socket.

    HINT:
    Tape the screwdriver tip before use.



3. REMOVE REAR POWER OUTLET SOCKET COVER (for Double Cab)


B165426E01
  1. Detach the 2 claws and remove the power outlet socket cover.



4. REMOVE NO. 2 CONSOLE BOX REGISTER ASSEMBLY (for CrewMax)


B169094
  1. Remove the 3 screws and register.



5. REMOVE NO. 1 CONSOLE BOX REGISTER ASSEMBLY (for CrewMax)


B174164
  1. Remove the 3 screws and register.



6. REMOVE NO. 2 SEATBACK LOCK CONTROL BEZEL (for CrewMax)


B171170E02
  1. for AC Power Supply:

    1. Disconnect the clamp.

  1. Remove the 4 screws and bezel.



7. REMOVE REAR POWER OUTLET SOCKET (for Standard)


    B170303
  1. Detach the claw and remove the power outlet socket.



8. REMOVE REAR POWER OUTLET SOCKET COVER (for Standard)


    B170304
  1. Detach the 2 claws and remove the power outlet socket cover.



9. REMOVE REAR POWER POINT SOCKET (for AC Power Supply)


    B170306
  1. Detach the 2 claws and remove the power outlet socket.



10. REMOVE VIDEO TERMINAL (for CrewMax)


    B169732
  1. Detach the clamp from the back panel.



    B171534
  1. Detach the 4 claws and remove the video terminal.



11. REMOVE CENTER SEAT CUSHION SHIELD LH


B165567
  1. Using a T30 "TORX" socket, remove the bolt.

  1. Detach the 7 claws and 2 clips, and remove the cushion shield.



12. REMOVE CENTER SEAT CUSHION SHIELD RH


B165568
  1. Using a T30 "TORX" socket, remove the bolt.

  1. Detach the 7 claws and 3 clips, and remove the cushion shield.



13. REMOVE CENTER FRONT SEAT CUSHION ASSEMBLY


    B165569
  1. Remove the 2 bolts and seat cushion.



14. REMOVE REAR SEAT LOCK LATCH


    B165570
  1. Using a T30 "TORX" socket, remove the 2 bolts.



    B165571
  1. Unfasten the button and remove the seat lock latch.



15. REMOVE CENTER FRONT SEAT CUSHION COVER


B165572E01
  1. Detach the 3 hooks and remove the seat cushion cover.



16. REMOVE CENTER FRONT SEAT CUSHION PAD


B165573E01
  1. Remove the hog rings and seat cushion pad.



17. REMOVE CENTER FRONT SEAT INNER BELT ASSEMBLY


B165811
  1. Remove the bolt and inner belt.



18. DISCONNECT CENTER FRONT SEAT BELT ASSEMBLY RH


B165812
  1. Remove the bolt and disconnect the seat belt.



19. REMOVE CENTER SEATBACK ASSEMBLY


    B165574
  1. Remove the 2 wire harness clamps from the center seatback frame.



    B165575
  1. LH Side:
    Using a T40 "TORX" socket, remove the 2 bolts.

  1. RH Side:
    Using a T55 "TORX" socket, remove the 2 bolts.

  1. Remove the center seatback.



20. REMOVE FOLD SEAT STOPPER CUSHION


B165576
  1. Using a T20 "TORX" socket, remove the 2 screws and 2 cushions.



21. REMOVE FRONT SEAT UNDER TRAY


    B165577
  1. Disconnect the power outlet socket connector.



    B165578
  1. Using a T30 "TORX" socket, remove the 2 bolts and under tray.



22. REMOVE POWER OUTLET SOCKET ASSEMBLY


B166902E01
  1. Disconnect the power outlet socket connector.

  1. Using a screwdriver, detach the claw and remove the power outlet socket.

    HINT:
    Tape the screwdriver tip before use.



23. REMOVE CENTER POWER OUTLET SOCKET COVER


B165428E01
  1. Detach the 2 claws and remove the power outlet socket cover.



24. REMOVE CONSOLE BOX WIRE


B165579
  1. Detach the 4 clamps and remove the console box wire.



25. REMOVE FRONT SEAT HEADREST ASSEMBLY


26. REMOVE FRONT SEAT SHOULDER BELT COVER


B165580
  1. Using a T10 "TORX" socket, remove the 2 screws and shoulder belt cover.



27. REMOVE UPPER REAR SEATBACK LOCK BEZEL


B165581
  1. Detach the 4 claws and remove the lock bezel.

  1. Disconnect the seat belt from the shoulder belt cover.



28. REMOVE LOWER FRONT SEAT SHOULDER BELT COVER


B165582
  1. Using a T30 "TORX" socket, remove the 2 bolts and shoulder belt cover.



29. REMOVE RECLINING REMOTE CONTROL BEZEL


B165583
  1. Detach the 2 clips and claw, and then remove the bezel.



30. REMOVE FRONT SEAT TRAY


B165584
  1. Detach the 5 clips and remove the tray.



31. REMOVE CENTER FRONT SEAT ARMREST COVER


B165585
  1. Remove the 2 screws and armrest cover.



32. REMOVE SEAT FASTENER COVER


B165586
  1. Using a screwdriver, detach the 6 claws and remove the 2 covers.

    HINT:
    Tape the screwdriver tip before use.



33. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY


    B165587
  1. Remove the 6 screws.



    B165588
  1. Detach the 21 claws and remove the screw.



    B165592
  1. LH Side:
    Disconnect the cable from the center seatback frame inner side.



    B165591
  1. RH Side:
    Disconnect the cable from the center seatback frame inner side.



34. REMOVE FRONT SEAT HEADREST SUPPORT


B165593
  1. Detach the 4 claws and remove the 2 headrest supports.



35. REMOVE CENTER FRONT SEATBACK COVER


36. REMOVE CENTER SEATBACK PAD


37. REMOVE CENTER SEAT RECLINING ADJUSTER INSIDE COVER LH


B165594
  1. Detach the claw and remove the cover.



38. REMOVE CENTER SEAT RECLINING ADJUSTER INSIDE COVER RH
  1. Detach the claw and remove the cover.



39. REMOVE CENTER FRONT SEAT BELT ASSEMBLY


B165813
  1. Remove the nut and bolt, and then detach the 2 claws and remove the center seat belt.