REAR SEAT ASSEMBLY (for Double Cab) > DISASSEMBLY |
| 1. REMOVE REAR SEAT ASSEMBLY LH |
![]() |
Using a T50 "TORX" socket, remove the 2 bolts and seat.
| 2. REMOVE NO. 1 SEAT LEG SUB-ASSEMBLY LH |
![]() |
Using a T40 "TORX" socket, remove the bolt.
Remove the bolt and seat leg.
| 3. REMOVE NO. 1 SEAT LEG SUB-ASSEMBLY RH |
![]() |
Remove the bolt and seat leg.
| 4. REMOVE OUTER REAR SEAT LOCK COVER LH |
![]() |
Remove the screw.
Detach the clip and 3 claws in the order shown in the illustration, and then remove the lock cover.
| 5. REMOVE INNER REAR SEAT LOCK COVER LH |
![]() |
Remove the 2 screws.
Detach the 3 claws in the order shown in the illustration, and then remove the lock cover.
| 6. REMOVE REAR SEAT CUSHION ASSEMBLY LH |
![]() |
Using a T40 "TORX" socket, remove the 2 bolts and seat cushion.
| 7. REMOVE REAR SEATBACK LOCK CONTROL BEZEL LH |
![]() |
Detach the 4 claws and remove the bezel.
| 8. REMOVE REAR SEAT CUSHION COVER WITH PAD LH |
![]() |
Disconnect the cable from the seat turn lock.
![]() |
Detach the hook and open the 2 fasteners, and then open the seat cushion cover.
![]() |
Detach the hooks from the seat cushion frame.
![]() |
Detach the hooks from the seat cushion frame.
![]() |
Remove the hog rings and seat cushion cover with pad.
| 9. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER LH |
![]() |
Remove the hog rings and seat cushion cover from the seat cushion pad.
| 10. REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE LH |
![]() |
Cut the cable tie and disconnect the cable.
Remove the 4 screws and release handle.
| 11. REMOVE REAR SEAT HINGE COVER LH |
![]() |
Remove the 2 screws and hinge cover.
| 12. REMOVE REAR SEAT HINGE COVER RH |
Remove the 2 screws and hinge cover.
| 13. REMOVE REAR SEAT TURN LOCK SUB-ASSEMBLY LH |
![]() |
Remove the bolt and seat turn lock.
| 14. REMOVE REAR SEAT HEADREST ASSEMBLY LH |
| 15. REMOVE CENTER REAR SEAT HEADREST ASSEMBLY |
| 16. REMOVE REAR SEAT HEADREST SUPPORT |
![]() |
Detach the 8 claws and remove the 4 headrest supports.
| 17. REMOVE REAR SEATBACK COVER WITH PAD LH |
![]() |
Detach the hooks and remove the seatback cover with pad.
| 18. REMOVE SEPARATE TYPE REAR SEATBACK COVER LH |
![]() |
Remove the hog rings and seatback cover from the seatback pad.
| 19. REMOVE SEAT LEG SUB-ASSEMBLY LH |
![]() |
Remove the bolt and seat leg.
| 20. REMOVE NO. 1 SEAT LEG SUB-ASSEMBLY |
![]() |
Using a T45 "TORX" socket, remove the bolt.
Remove the bolt and seat leg.
| 21. REMOVE INNER REAR SEAT LOCK COVER RH |
![]() |
Remove the 2 screws.
Detach the 3 claws in the order shown in the illustration, and then remove the lock cover.
| 22. REMOVE OUTER REAR SEAT LOCK COVER RH |
![]() |
Remove the screw.
Detach the clip and 3 claws in the order shown in the illustration, and then remove the lock cover.
| 23. REMOVE REAR SEAT CUSHION ASSEMBLY RH |
![]() |
Using a T40 "TORX" socket, remove the 2 bolts and seat cushion.
| 24. REMOVE REAR SEATBACK LOCK CONTROL BEZEL RH |
![]() |
Detach the 4 claws and remove the bezel.
| 25. REMOVE REAR SEAT CUSHION COVER WITH PAD RH |
![]() |
Disconnect the cable from the rear seat turn lock.
![]() |
Detach the hook and open the 2 fasteners, and then open the seat cushion cover.
![]() |
Detach the hooks from the seat cushion frame.
![]() |
Detach the hooks and remove the hog rings, and then remove the seat cushion cover with pad.
| 26. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER RH |
![]() |
Remove the hog rings and seat cushion cover from the seat cushion pad.
| 27. REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE RH |
![]() |
Cut the cable tie and disconnect the cable.
Remove the 4 screws and release handle.
| 28. REMOVE REAR SEAT HINGE COVER LH |
![]() |
Remove the 2 screws and hinge cover.
| 29. REMOVE REAR SEAT HINGE COVER RH |
Remove the 2 screws and hinge cover.
| 30. REMOVE REAR SEAT TURN LOCK SUB-ASSEMBLY RH |
![]() |
Remove the bolt and seat turn lock.
| 31. REMOVE REAR SEAT HEADREST ASSEMBLY RH |
| 32. REMOVE REAR SEAT HEADREST SUPPORT RH |
![]() |
Detach the 4 claws and remove the 2 headrest supports.
| 33. REMOVE REAR SEATBACK COVER WITH PAD RH |
![]() |
Detach the hooks and remove the seatback cover with pad.
| 34. REMOVE SEPARATE TYPE REAR SEATBACK COVER RH |
![]() |
Remove the hog rings and seatback cover from the seatback pad.