Home › BODY › SEAT › SEAT MEMORY SWITCH (w/ Seat Position Memory System)

SEAT MEMORY SWITCH (w/ Seat Position Memory System) > REMOVAL

for Preparation Click here



1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH


    B165648E02
  1. Using a screwdriver, detach the 4 claws and remove the inside handle bezel.

    HINT:
    Tape the screwdriver tip before use.



2. REMOVE FRONT ARMREST UPPER BASE PANEL LH


    B166211
  1. Using a screwdriver, detach the 2 clips and front armrest upper base panel.

    HINT:
    Tape the screwdriver tip before use.

  1. Disconnect the connectors.



3. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH


    B168274E01
  1. Detach the 3 clips and remove the door lower frame bracket garnish.



4. REMOVE COURTESY LIGHT ASSEMBLY


    B165655
  1. Detach the claw and remove the courtesy light from the door trim board.

  1. Disconnect the connector.



5. REMOVE FRONT DOOR ARMREST COVER LH


6. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


    B166215E01
  1. Remove the 2 screws.

  1. Using a clip remover, remove the clip.

  1. Detach the 9 clips and remove the trim cover. Then disconnect the connector.



    B165654E01
  1. Disconnect the 2 cables from the inside handle.

  1. Remove the inside handle.



7. REMOVE SEAT MEMORY SWITCH


    B166227
  1. Remove the 2 screws and seat memory switch.