FRONT POWER SEAT MOTOR ASSEMBLY (for Power Seat) > INSPECTION |
| 1. INSPECT FRONT SEAT FRAME WITH ADJUSTER ASSEMBLY LH |
![]() |
Check operation of the seat frame (slide motor).
Check if the seat frame moves smoothly when the battery is connected to the slide motor connector terminals.
| Measurement Condition | Operational Direction |
| Battery positive (+) → 1 Battery negative (-) → 2 | Front |
| Battery positive (+) → 2 Battery negative (-) → 1 | Rear |
![]() |
Check operation of the seat frame (front vertical motor).
Check if the seat frame moves smoothly when the battery is connected to the front vertical motor connector terminals.
| Measurement Condition | Operational Direction |
| Battery positive (+) → 1 Battery negative (-) → 2 | Up |
| Battery positive (+) → 2 Battery negative (-) → 1 | Down |
![]() |
Check operation of the seat frame (lifter motor).
Check if the seat frame moves smoothly when the battery is connected to the lifter motor connector terminals.
| Measurement Condition | Operational Direction |
| Battery positive (+) → 2 Battery negative (-) → 1 | Up |
| Battery positive (+) → 1 Battery negative (-) → 2 | Down |
![]() |
Check operation of the seat frame (reclining motor).
Check if the seat frame moves smoothly when the battery is connected to the reclining motor connector terminals.
| Measurement Condition | Operational Direction |
| Battery positive (+) → 2 Battery negative (-) → 1 | Front |
| Battery positive (+) → 1 Battery negative (-) → 2 | Rear |
![]() |
Check operation of the seat frame (leg support adjustment motor).
Check if the seat frame moves smoothly when the battery is connected to the leg support adjustment motor connector terminals.
| Measurement Condition | Operational Direction |
| Battery positive (+) → 1 Battery negative (-) → 2 | Open |
| Battery positive (+) → 2 Battery negative (-) → 1 | Close |
| 2. INSPECT FRONT SEAT FRAME WITH ADJUSTER ASSEMBLY RH |
![]() |
Check operation of the seat frame (slide motor).
Check if the seat frame moves smoothly when the battery is connected to the slide motor connector terminals.
| Measurement Condition | Operational Direction |
| Battery positive (+) → 2 Battery negative (-) → 1 | Front |
| Battery positive (+) → 1 Battery negative (-) → 2 | Rear |
![]() |
Check operation of the seat frame (reclining motor).
Check if the seat frame moves smoothly when the battery is connected to the reclining motor connector terminals.
| Measurement Condition | Operational Direction |
| Battery positive (+) → 2 Battery negative (-) → 1 | Front |
| Battery positive (+) → 1 Battery negative (-) → 2 | Rear |