FRONT POWER SEAT LUMBAR SWITCH (for Power Seat) > INSPECTION |
| 1. INSPECT FRONT POWER SEAT LUMBAR SWITCH LH |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
| 3 (B) - 4 (H) | HOLD | Below 1 Ω |
| 1 (R) - 2 (E2) | ||
| 1 (R) - 2 (E2) | OFF | |
| 4 (H) - 5 (E) | ||
| 1 (R) - 3 (B) | RELEASE | |
| 4 (H) - 5 (E) |
| 2. INSPECT FRONT POWER SEAT LUMBAR SWITCH RH |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
| 3 (B) - 4 (H1) | HOLD | Below 1 Ω |
| 1 (R1) - 2 (E2) | ||
| 1 (R1) - 2 (E2) | OFF | |
| 4 (H1) - 5 (E) | ||
| 1 (R1) - 3 (B) | RELEASE | |
| 4 (H1) - 5 (E) |