FRONT SEAT CUSHION HEATER (w/ Seat Heater System) > INSTALLATION |
| 1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY LH |

Set the seat cushion heater with the name stamp side facing the seat cushion cover.
Install the seat cushion heater with the tack pins.
| 2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER LH |

Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.
![]() |
w/o Leg Support Adjustment Switch:
Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.
| 3. INSTALL FRONT SEAT CUSHION COVER WITH PAD LH |
![]() |
w/o Leg Support Adjustment Switch:
Attach the hooks to install the seat cushion cover with pad.
Using hog ring pliers, install new hog rings.
Bend the 2 seat frame claws downward.
Install the seat cushion cover with pad to the seat frame.
![]() |
Install the seat cushion cover wire.
![]() |
Using hog ring pliers, install new hog rings and attach the hooks.
![]() |
Connect the seat heater control connector and attach the 2 wire harness clamps.
![]() |
Connect the seat heater connector and attach the 2 wire harness clamps.
![]() |
Install the 2 clips.
| 4. INSTALL FRONT POWER SEAT SWITCH LH |
![]() |
Install the switch with the 3 screws.
Connect the 2 switch connectors.
w/o Seat Position Memory System:
Connect the switch connector.
| 5. INSTALL INNER FRONT SEAT CUSHION SHIELD LH |
![]() |
Attach the 2 claws and clip to install the cushion shield.
Install the screw.
| 6. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH |
![]() |
Install the front seat inner belt with the nut.
Driver Side:
Connect the 2 connectors and attach the 4 clamps.
Passenger Side:
Connect the connector and attach the clamp.
| 7. INSTALL FRONT SEAT CUSHION SHIELD LH |
![]() |
Connect the switch connectors.
Attach the 2 claws to install the cushion shield.
Install the 3 screws.
![]() |
Install the 2 screws.
Using hog ring pliers, install the rubber band of the seatback cover to the seat frame with new hog rings.
| 8. INSTALL RECLINING POWER SEAT SWITCH KNOB LH |
![]() |
Attach the 2 claws to install the knob.
| 9. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB LH |
![]() |
Attach the 2 claws to install the knob.
| 10. INSTALL FRONT SEAT ASSEMBLY LH |
Install the front seat (Click here).