Home › BODY › SEAT › FRONT SEAT CUSHION HEATER (w/ Seat Heater System)

FRONT SEAT CUSHION HEATER (w/ Seat Heater System) > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH


B165797E04
  1. Heat the thermostat with a light.

  1. Check the seat cushion heater.

    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance:
      Tester Connection
      Condition
      Specified Condition
      A-1 - A-4
      Seat cushion heater temperature 20°C (68°F)
      3.0 to 3.6 Ω
      A-1 - B-1
      Seat cushion heater temperature 20°C (68°F)
      3.0 to 3.6 Ω
      A-1 - B-2
      Thermostat temperature 25 to 35°C (77 to 95°F)
      Below 1 Ω

      If the result is not as specified, replace the seat cushion heater.



2. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH


B165797E04
  1. Heat the thermostat with a light.

  1. Check the seat cushion heater.

    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance:
      Tester Connection
      Condition
      Specified Condition
      A-1 - A-4
      Seat cushion heater temperature 20°C (68°F)
      3.0 to 3.6 Ω
      A-1 - B-1
      Seat cushion heater temperature 20°C (68°F)
      3.0 to 3.6 Ω
      A-1 - B-2
      Thermostat temperature 25 to 35°C (77 to 95°F)
      Below 1 Ω

      If the result is not as specified, replace the seat cushion heater.