DTC U0100 Lost Communication with ECM / PCM "A" |
| DTC Code | DTC Detection Condition | Trouble Area |
| U0100 | When either of following conditions is detected:
| CAN communication system |

| 1.CHECK FOR DTC |
Check for DTCs and note any codes that are output (Click here).
Clear the DTC (Click here).
Recheck for DTC (Click here).
| Result | Proceed to |
| CAN communication system DTC is not output | A |
| CAN communication system DTC is output | B |
|
| ||||
| A | ||
| ||