Home › BODY › SEAT › FRONT POWER SEAT CONTROL SYSTEM (w/ Memory)

FRONT POWER SEAT CONTROL SYSTEM (w/ Memory) > SYSTEM DESCRIPTION

for Preparation Click here



FRONT POWER SEAT CONTROL SYSTEM DESCRIPTION
  1. The driver seat is equipped with slide, reclining, lifter, front vertical, lumbar support and leg support adjustment functions.

  2. The passenger seat is equipped with slide, reclining and lumbar support adjustment functions.

  3. The memory system for the driver seat is provided as standard equipment.


FUNCTION OF MAIN COMPONENT
The following functions are available.

Components
Function
Slide position motor
Receives signal from front power seat switch, motor operates, and seat slides forward and rearward.
Reclining position motor
Receives signal from front power seat switch, motor operates, and seat tilts and reclines.
Front power seat cushion control motor
Receives signal from leg support adjustment switch, motor operates, and seat cushion front opens and closes.
Vertical position motor
Receives signal from front power seat switch, and seat cushion front rises and lowers vertically.
Lifter position motor
Receives signal from front power seat switch, and seat cushion rises and lowers vertically.
Front lumbar support motor
Receives signal from front power seat lumbar switch, and lumbar support can be adjusted.
Seat position sensor
Is built into each seat adjuster and sends position data to front power seat switch so that it can detect seat positions at all times.
Front power seat switch
Based on switches operated, seat adjuster signals are input into position control ECU and seat is adjusted accordingly.
Front power seat lumbar switch
Based on switches operated, seat adjuster signals are input into switch and seat is adjusted accordingly.
Leg support adjustment switch
Based on switches operated, seat adjuster signals are input into switch and seat is adjusted accordingly.
Seat memory switch
When SET switch and memory switch are pressed simultaneously, signal is input to outer mirror control ECU and seat position is recorded.
Then, when memory switch is pressed, signal is input to outer mirror control ECU and seat position changes according to memory.