Home › ENGINE ยท 2UZ-FE › EMISSION CONTROL › AIR PUMP (for Bank 2)

AIR PUMP (for Bank 2) > REASSEMBLY

for Preparation Click here



1. INSTALL AIR PUMP


A153501
  1. Install the pump to the bracket with the 3 air pump insulators.

  1. Install the clamp.



2. INSTALL NO. 1 AIR INJECTION SYSTEM HOSE


3. INSTALL AIR PUMP INLET


A153502E01
  1. Install the air pump inlet with the 2 bolts as shown in the illustration.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

    NOTICE:
    Fully the insert hose to the stoppers.