Home › TRANSMISSION ยท AB60E AUTOMATIC TRANSMISSION › SHIFT LEVER ASSEMBLY (for Floor Shift Type)

SHIFT LEVER ASSEMBLY (for Floor Shift Type) > DISASSEMBLY

for Preparation Click here



1. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY


C158363E01
  1. Using a thin-bladed screwdriver, release the connector housing retainer.

  1. Using a thin-bladed screwdriver, pull out the 4 (ILL+) and 8 (ILL-) terminals from the rear as shown in the illustration.



    C159635E01
  1. Rotate the indicator light wire counterclockwise to align the key part and remove the wire.



2. REMOVE SHIFT LOCK RELEASE BUTTON


C159636
  1. Detach the 4 claws and remove the position indicator housing from the floor shift.



    C159637
  1. Detach the 2 claws and remove the button.



3. REMOVE SHIFT LOCK CONTROL ECU


C159638
  1. Disconnect the shift lock solenoid connector from the ECU.

  1. Detach the 3 claws and remove the ECU.