Home › BODY ELECTRICAL › METER › ACCESSORY METER

ACCESSORY METER > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT ACCESSORY METER ASSEMBLY


E146077E03
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    12 (E) - Body ground
    Always
    Below 1 Ω

  1. Measure the voltage according to the value(s) in the table below.

    Standard voltage:
    Tester Connection
    Condition
    Specified Condition
    22 (ACC) - Body ground
    Ignition switch OFF
    Below 1 V
    Ignition switch ACC
    10 to 14 V
    24 (+B) - Body ground
    Always
    10 to 14 V