Home › ENGINE ยท 1GR-FE › ENGINE MECHANICAL › ENGINE UNIT

ENGINE UNIT > REMOVAL

for Preparation Click here



1. DISCONNECT NO. 1 WATER BY-PASS PIPE


    A151266
  1. Disconnect the 2 water by-pass pipe hoses and remove the pipe.



2. DISCONNECT HEATER WATER PIPE SUB-ASSEMBLY


    A151267
  1. Remove the 2 bolts and disconnect the heater water pipe's hose.



3. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY


    A133704
  1. Disconnect the 6 fuel injector connectors.

  1. Remove the 6 bolts and fuel delivery pipe together with the 6 fuel injectors.

    NOTICE:
    Be careful not to drop the injectors when removing the fuel delivery pipe.



4. REMOVE FUEL INJECTOR


    A133705
  1. Pull the 6 fuel injectors from the fuel delivery pipe.

  1. Remove the O-ring and injector vibration insulator from each fuel injector.



5. REMOVE INTAKE MANIFOLD


    A151776
  1. Remove the 10 bolts, intake manifold and 2 gaskets.



6. REMOVE ENGINE WIRE


7. REMOVE IGNITION COIL ASSEMBLY
  1. Disconnect the 6 ignition coil connectors.



    A151791
  1. Remove the 6 bolts and 6 ignition coils.



8. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY


    A076445E01
  1. Remove the 5 bolts and V-ribbed belt tensioner.



9. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE


    A158542
  1. Remove the bolt and dipstick guide.

  1. Remove the O-ring from the dipstick guide.



10. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH


    A158540
  1. Remove the 4 bolts and front No. 1 engine mounting bracket RH.



11. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH


    A158652
  1. Remove the 3 bolts and front No. 1 engine mounting bracket LH.



12. REMOVE NO. 1 IDLER PULLEY SUB-ASSEMBLY


    A158544
  1. Remove the bolt and No. 1 idler pulley.



13. REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY

HINT:
Use the same procedure for both No. 2 idler pulleys.



  1. w/ Idler Pulley Cover Plate:



      A191314E01
    1. Remove the bolt, No. 2 idler pulley cover plate, idler pulley and idler pulley cover plate.



  1. w/o Idler Pulley Cover Plate:



      A191315E01
    1. Remove the bolt, No. 2 idler pulley cover plate and idler pulley.