Home › ENGINE ยท 1GR-FE › ENGINE MECHANICAL › REAR ENGINE MOUNTING

REAR ENGINE MOUNTING > INSTALLATION

for Preparation Click here



1. SUPPORT AUTOMATIC TRANSMISSION ASSEMBLY


    C112848
  1. Support the transmission with a transmission jack. Lift the transmission slightly off of the crossmember.



2. INSTALL REAR NO. 1 ENGINE MOUNTING INSULATOR


    C155909
  1. Install the engine mounting insulator to the transmission with the 4 bolts.

    Torque:
    40 N*m{ 408 kgf*cm , 30 ft.*lbf }



3. INSTALL NO. 3 FRAME CROSSMEMBER SUB-ASSEMBLY


    C155908
  1. Install the frame crossmember to the engine rear mounting insulator with the 4 bolts.

    Torque:
    16 N*m{ 63 kgf*cm , 12 ft.*lbf }



    C155907
  1. Install the frame crossmember with the 4 bolts, 4 plate washers and 4 nuts.

    Torque:
    110 N*m{ 1122 kgf*cm , 81 ft.*lbf }