Home › ENGINE ยท 1GR-FE › ENGINE MECHANICAL › REAR ENGINE MOUNTING

REAR ENGINE MOUNTING > REMOVAL

for Preparation Click here



1. SUPPORT AUTOMATIC TRANSMISSION ASSEMBLY


    C112848
  1. Support the transmission with a transmission jack. Lift the transmission slightly off of the crossmember.



2. REMOVE NO. 3 FRAME CROSSMEMBER SUB-ASSEMBLY


    C155908
  1. Remove the 4 bolts of the rear No. 3 engine mounting insulator.



    C155907
  1. Remove the 4 nuts, 4 bolts, 4 plate washers and crossmember.



3. REMOVE REAR NO. 1 ENGINE MOUNTING INSULATOR


    C155909
  1. Remove the 4 bolts and engine mounting insulator from the transmission.