SEAT BELT WARNING SYSTEM > SYSTEM DESCRIPTION |
| SEAT BELT WARNING SYSTEM DESCRIPTION |
Driver side seat belt warning light:
When the driver side seat belt is not fastened with the ignition switch ON, the driver side seat belt warning light on the meter comes on to inform the driver. The center airbag sensor detects the driver side seat belt status and sends signals to the meter ECU using CAN.
Front passenger side seat belt warning light:
When the front passenger side seat belt is not fastened with the ignition switch ON and the front passenger side seat occupied, the front passenger side seat belt warning light on the integration control and panel blinks. The integration control and panel displays the front passenger side seat belt status and whether the front passenger side seat is occupied.
Seat belt warning buzzer:
When the vehicle is driven at approximately 20 km/h (12 mph) or more while the driver or front passenger side seat belt is not fastened, the seat belt warning buzzer in the meter ECU sounds at intervals of 1.2 seconds 5 times.
| FUNCTION OF MAIN COMPONENT |
| Components | Function |
| Front seat inner belt LH (driver side buckle switch) | Informs center airbag sensor of driver side seat belt condition (fastened or unfastened) |
| Front seat inner belt RH (passenger side buckle switch) | Informs center airbag sensor of front passenger side seat belt condition (fastened or unfastened) |
| Occupant detection sensor | Informs center airbag sensor of front passenger side seat condition (occupied or unoccupied) |
| Driver side seat belt warning light | If driver side seat belt is unfastened and ignition switch is ON, meter ECU flashes seat belt warning light of combination meter as reminder |
| Front passenger side seat belt warning light | When front passenger side seat is occupied and ignition switch is ON, if front passenger side seat belt is unfastened, meter ECU flashes seat belt warning light of integration control and panel as reminder |
| Seat belt warning buzzer | If driver or front passenger side seat belt is unfastened and ignition switch is ON, meter ECU sounds buzzer as reminder |
| SYSTEM OPERATION |
Driver side seat belt warning light:
When the driver side seat belt is not fastened with the ignition switch ON, check that the driver side seat belt warning light on the meter comes on to inform the driver.
Front passenger side seat belt warning light:
When the front passenger side seat belt is not fastened with the ignition switch ON and the front passenger side seat occupied, check that the front passenger side seat belt warning light on the integration control and panel blinks.