Home › BODY ELECTRICAL › DOOR LOCK › DOOR CONTROL RECEIVER (for Regular Cab)

DOOR CONTROL RECEIVER (for Regular Cab) > INSTALLATION

for Preparation Click here



1. INSTALL DOOR CONTROL RECEIVER


B164741E01
  1. Install the receiver with the bolt.

  1. Connect the door control receiver connector.



2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

HINT:
Use the same procedures described for the LH side.



3. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY RH


B164745
  1. Attach the 8 clips to install the quarter trim panel.



    B167430
  1. Twist the seat belt counterclockwise and install the outer lap belt anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B164750
  1. Attach the 2 claws to install the cover.



4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH


5. INSTALL FRONT DOOR SCUFF PLATE RH
  1. Install the front door scuff plate .

    HINT:
    The procedures listed below are for the LH side.



6. INSTALL LUGGAGE COMPARTMENT BOX RH


B164748
  1. Install the luggage compartment box with the 4 clips.



7. INSTALL LUGGAGE COMPARTMENT BOX LH


B164747
  1. Attach the 3 claws to install the luggage compartment box.

  1. Install the 2 clips.



8. INSTALL UPPER BACK PANEL GARNISH


B164740
  1. Attach the 10 clips to install the back panel garnish.