Home › BODY ELECTRICAL › OTHER SYSTEM › CIGARETTE LIGHTER ASSEMBLY (for Column Shift Type)

CIGARETTE LIGHTER ASSEMBLY (for Column Shift Type) > INSTALLATION

for Preparation Click here



1. INSTALL CIGARETTE LIGHTER INDICATOR LENS


B165980E01
  1. Attach the 2 claws to install the cigarette lighter indicator lens.



2. INSTALL CIGARETTE LIGHTER ASSEMBLY


B166003E01
  1. Attach the claw to install the cigarette lighter socket and retainer.

  1. Install the cigarette lighter knob and element.



3. INSTALL CIGARETTE LIGHTER COVER


B165978E01
  1. Install the cigarette lighter cover.



4. INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL


    B160587
  1. Connect the connectors.

  1. Attach the 4 clips to install the finish panel.

  1. Install the 2 screws.



5. INSTALL FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY


6. INSTALL CENTER LOWER INSTRUMENT COVER


  1. Install the cover with the 2 clips.


    B171284E01



7. INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER LH


    B163883
  1. for Automatic Air Conditioning System:
    Attach the 2 claws to install the sensor.



    B160582
  1. Connect the connectors.

  1. Attach the 4 clips and claw to install the finish panel.

  1. Install the 2 bolts.

  1. Install the hood lock control lever.



8. INSTALL INSTRUMENT SIDE PANEL LH


    B163942
  1. Attach the 7 claws to install the side panel.



9. INSTALL COWL SIDE TRIM BOARD LH


B165704
  1. Remove the clip.

  1. Detach the 2 clips and remove the cowl side trim board.



10. INSTALL FRONT DOOR SCUFF PLATE LH (for Regular Cab)


B165843
  1. Attach the 6 claws and 3 clips to install the scuff plate.



11. INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab)