Home › BODY ELECTRICAL › OTHER SYSTEM › CIGARETTE LIGHTER ASSEMBLY (for Column Shift Type)

CIGARETTE LIGHTER ASSEMBLY (for Column Shift Type) > REMOVAL

for Preparation Click here



1. REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab)


B165841
  1. Detach the 6 claws and 3 clips, and remove the scuff plate.



2. REMOVE FRONT DOOR SCUFF PLATE LH (for Regular Cab)


B165843
  1. Detach the 6 claws and 3 clips, and remove the scuff plate.



3. REMOVE COWL SIDE TRIM BOARD LH


B165704
  1. Remove the clip.

  1. Detach the 2 clips and remove the cowl side trim board.



4. REMOVE INSTRUMENT SIDE PANEL LH


    B160581
  1. Using a moulding remover, detach the 7 claws and remove the side panel.



5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH


    B160582
  1. Remove the hood lock control lever.

  1. Remove the 2 bolts.

  1. Detach the 4 clips and claw.



    B163883
  1. for Automatic Air Conditioning System:
    Detach the 2 claws and remove the sensor.

  1. Remove the finish panel and then disconnect the connectors.



6. CENTER LOWER INSTRUMENT COVER


  1. Remove the 2 clips and cover.


    B171284E01



7. REMOVE FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY


8. REMOVE LOWER INSTRUMENT CLUSTER FINISH PANEL


    B160587
  1. Remove the 2 screws.

  1. Detach the 4 clips.

  1. Remove the finish panel and then disconnect the connectors.



9. REMOVE CIGARETTE LIGHTER COVER


B165978E01
  1. Remove the cigarette lighter cover.



10. REMOVE CIGARETTE LIGHTER ASSEMBLY


B165979E01
  1. Remove the cigarette lighter knob and element.

  1. Using a screwdriver, detach the claw and remove the cigarette lighter socket and retainer assembly from the lower instrument cluster finish panel.

    HINT:
    Tape the screwdriver tip before use.



11. REMOVE CIGARETTE LIGHTER INDICATOR LENS


B165980E01
  1. Detach the 2 claws and remove the cigarette lighter indicator lens.