Home › BODY ELECTRICAL › OTHER SYSTEM › CIGARETTE LIGHTER ASSEMBLY (for Floor Shift Type)

CIGARETTE LIGHTER ASSEMBLY (for Floor Shift Type) > INSTALLATION

for Preparation Click here



1. INSTALL CIGARETTE LIGHTER INDICATOR LENS


B165437E01
  1. Attach the 2 claws to install the cigarette lighter indicator lens.



2. INSTALL CIGARETTE LIGHTER ASSEMBLY


B166001E01
  1. Attach the claw to install the cigarette lighter socket and retainer.

  1. Install the cigarette lighter knob and element.



3. INSTALL CIGARETTE LIGHTER COVER


B165435E01
  1. Install the cigarette lighter cover.



4. INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL


    B161747
  1. Connect the connectors.

  1. Attach the 4 clips to install the finish panel.



5. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
  1. w/ Trailer Towing System:
    Connect the connector.

  1. Attach the 6 clips to install the console panel.



  1. Install the clip.


    B171298



6. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    B161742
  1. Attach the 12 clips to install the console panel.



7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    B167312
  1. Install the shift lever knob and twist it in the direction indicated by the arrow.