CIGARETTE LIGHTER ASSEMBLY (for Floor Shift Type) > REMOVAL |
| 1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Twist the shift lever knob in the direction indicated by the arrow and remove it.
| 2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Detach the 12 clips and remove the console panel.
| 3. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
Remove the clip.
Detach the 6 clips and remove the console panel.
w/Trailer Towing System:
Disconnect the connector

| 4. REMOVE CENTER LOWER INSTRUMENT PANEL FINISH PANEL |
![]() |
Detach the 4 clips.
Remove the finish panel and then disconnect the connectors.
| 5. REMOVE CIGARETTE LIGHTER COVER |
![]() |
Remove the cigarette lighter cover.
| 6. REMOVE CIGARETTE LIGHTER ASSEMBLY |
Remove the cigarette lighter knob and element.
![]() |
Using a screwdriver, detach the claw and remove the cigarette lighter socket and retainer assembly from the lower instrument cluster finish panel.
| 7. REMOVE CIGARETTE LIGHTER INDICATOR LENS |
![]() |
Detach the 2 claws and remove the cigarette lighter indicator lens.