Home › BODY ELECTRICAL › OTHER SYSTEM › CENTER POWER OUTLET SOCKET (for Floor Shift Type)

CENTER POWER OUTLET SOCKET (for Floor Shift Type) > REMOVAL

for Preparation Click here



1. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    B161742
  1. Detach the 12 clips and remove the console panel.



2. REMOVE CONSOLE BOX BEZEL


B165430E01
  1. Disconnect the connector.

  1. Using a screwdriver, detach the 5 claws and remove the console box bezel.

    HINT:
    Tape the screwdriver tip before use.



3. REMOVE POWER OUTLET SOCKET ASSEMBLY


B165995E01
  1. Using a screwdriver, detach the claw and remove the power outlet socket.

    HINT:
    Tape the screwdriver tip before use.



4. REMOVE POWER OUTLET SOCKET COVER


B165431E01
  1. Detach the 2 claws and remove the power outlet socket cover.



5. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY (for Double Cab)


    B161744
  1. Using a moulding remover, detach the 7 clips and remove the end panel.

  1. except Regular Cab:
    Disconnect the connector.



6. REMOVE REAR POWER OUTLET SOCKET ASSEMBLY (for Double Cab)


B165432E01
  1. Using a screwdriver, detach the claw and remove the power outlet socket.

    HINT:
    Tape the screwdriver tip before use.



7. REMOVE REAR POWER OUTLET SOCKET COVER (for Double Cab)


B165433E01
  1. Detach the 2 claws and remove the power outlet socket cover.