DOOR CONTROL SWITCH (for Front LH) > INSPECTION |
| 1. INSPECT DOOR CONTROL SWITCH ASSEMBLY (for Regular Cab) |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
| 1 (L) - 7 (E) | Lock | Below 1 Ω |
| 1 (L) - 7 (E) | OFF | 10 kΩ or higher |
| 9 (UL) - 7 (E) | ||
| 9 (UL) - 7 (E) | Unlock | Below 1 Ω |
| 2. INSPECT DOOR CONTROL SWITCH ASSEMBLY (for Double Cab) |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
| 2 (L) - 1 (E) | Lock | Below 1 Ω |
| 2 (L) - 1 (E) | OFF | 10 kΩ or higher |
| 9 (UL) - 1 (E) | ||
| 9 (UL) - 1 (E) | Unlock | Below 1 Ω |