Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)

AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) > ACTUATOR CHECK

for Preparation Click here



ACTUATOR CHECK
E146560
  1. Turn the ignition switch ON while pressing the A/C control AUTO switch and Recirculation / Fresh switch simultaneously.



  2. E146561
  3. Press the Recirculation / Fresh switch.

  4. As each damper, motor and relay automatically operate the actuator check at 1 second intervals from step No. 1 to No. 10 continuously, check the temperature and airflow visually and by hand.

HINT:
  1. If a slower display is desired, press the driver temperature up switch and change the display in the step operation. Each time the driver temperature up switch is pressed, the display changes by 1 step.
  2. The buzzer sounds when the displayed trouble code changes.
  3. Codes are displayed from smaller to larger numbers in order.
  4. To cancel the check mode, press the "OFF" switch.


Air conditioning unit 
Step No.
Display Code
Condition
Blower Level
Air Mix Damper
Airflow Vent
Air Inlet Damper
Compressor
1
0
0
0% open
FACE
FRESH
OFF
2
1
1
0% open
FACE
FRESH
OFF
3
2
17
0% open
FACE
RECIRCULATION / FRESH
ON
4
3
17
0% open
FACE
RECIRCULATION
ON
5
4
17
50% open
B/L
RECIRCULATION
ON
6
5
17
50% open
B/L
RECIRCULATION
ON
7
6
17
50% open
FOOT
FRESH
ON
8
7
17
100% open
FOOT-0
FRESH
ON
9
8
17
100% open
F/D
FRESH
ON
10
9
31
100% open
DEF
FRESH
ON