Home › BODY ELECTRICAL › DOOR LOCK › DOOR CONTROL RECEIVER (for CrewMax)

DOOR CONTROL RECEIVER (for CrewMax) > INSTALLATION

for Preparation Click here



1. INSTALL DOOR CONTROL RECEIVER


B170312E01
  1. Install the receiver with the bolt.

  1. Connect the door control receiver connector.



2. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY RH


B173407
  1. Attach the 3 clips to install the quarter trim panel.



    B173410
  1. Install the outer lap belt anchor with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B173409
  1. Attach the 2 claws to install the cover.



3. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH


4. INSTALL REAR DOOR SCUFF PLATE RH


    B173408
  1. Attach the 8 claws and 2 clips to install the scuff plate.



5. INSTALL BACK PANEL TRIM RH


B169224E04
  1. Attach the 8 clips to install the back panel trim.

  1. Install the package holder net hook.