DOOR CONTROL RECEIVER (for CrewMax) > REMOVAL |
| 1. REMOVE BACK PANEL TRIM RH |
![]() |
Remove the package holder net hook.
Detach the 8 clips and remove the back panel trim.
| 2. REMOVE REAR DOOR SCUFF PLATE RH |
![]() |
Detach the 8 claws and 2 clips, and remove the scuff plate.
| 3. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH |
| 4. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY RH |
![]() |
Detach the 2 claws and remove the cover.
![]() |
Remove the bolt and outer lap belt anchor.
![]() |
Detach the 3 clips and remove the quarter trim panel.
| 5. REMOVE DOOR CONTROL RECEIVER |
![]() |
Disconnect the door control receiver connector.
Remove the bolt and receiver.