Home › BODY ELECTRICAL › LIGHTING › PERSONAL LIGHT ASSEMBLY (for Short Type Overhead Console Box)

PERSONAL LIGHT ASSEMBLY (for Short Type Overhead Console Box) > DISASSEMBLY

for Preparation Click here


HINT:
When only replacing the personal light bulbs, use the following procedures.



1. REMOVE PERSONAL LIGHT BULB


    E147653
  1. Using a screwdriver, detach the 6 claws.

    HINT:
    Tape the screwdriver tip before use.

  1. Remove the 2 personal light lenses.



    E147654
  1. Remove the 2 bulbs.