CYLINDER HEAD > DISASSEMBLY |
| 1. REMOVE INTAKE VALVE |
![]() |
Using SST, compress the compression spring and remove the 2 valve spring retainer locks.
Remove the spring retainer, compression spring, valve and spring seat.
| 2. REMOVE EXHAUST VALVE |
![]() |
Using SST, compress the compression spring and remove the 2 valve spring retainer locks.
Remove the spring retainer, compression spring, valve and spring seat.
| 3. REMOVE VALVE STEM OIL SEAL |
![]() |
Using needle nose pliers, remove the oil seals.