Home › BODY ELECTRICAL › LIGHTING › TURN SIGNAL FLASHER ASSEMBLY

TURN SIGNAL FLASHER ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL TURN SIGNAL FLASHER ASSEMBLY


    E146585
  1. Install the flasher with the nut.

  1. Connect the connector.



2. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD INSERT


    B160602
  1. Connect the connector.

  1. Attach the 2 claws to install the safety pad.

  1. Install the 4 bolts.



3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH


    B163883
  1. for Automatic Air Conditioning System:
    Attach the 2 claws to install the sensor.



    B160582
  1. Connect the connectors.

  1. Attach the 4 clips and claw to install the finish panel.

  1. Install the 2 bolts.

  1. Install the hood lock control lever.



4. INSTALL INSTRUMENT SIDE PANEL LH


    B163942
  1. Attach the 7 claws to install the side panel.



5. INSTALL COWL SIDE TRIM BOARD LH


B165704
  1. Attach the 2 clips to install the cowl side trim board.

  1. Install the clip.



6. INSTALL FRONT DOOR SCUFF PLATE LH (for Regular Cab)


B165843
  1. Attach the 6 claws and 3 clips to install the scuff plate.



7. INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab)


B165841
  1. Attach the 6 claws and 3 clips to install the scuff plate.