Home › BODY › SEAT › FRONT POWER SEAT LUMBAR SWITCH (for Manual Seat)

FRONT POWER SEAT LUMBAR SWITCH (for Manual Seat) > INSTALLATION

for Preparation Click here



1. INSTALL FRONT POWER SEAT LUMBAR SWITCH LH
  1. Install the switch with the 2 screws.



2. INSTALL FRONT SEAT CUSHION SHIELD LH


B166409E01
  1. w/ Lumbar Support Adjuster:
    Connect the switch connector.

  1. Attach the 3 claws in the order shown in the illustration, and install the cushion shield.

  1. Install the 2 screws.



    B165523E03
  1. Using hog ring pliers, install the rubber band of the seatback cover to the seat frame with new hog rings.



3. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH


B165804
  1. Attach the claw to install the reclining adjuster release handle.



4. INSTALL VERTICAL SEAT ADJUSTER KNOB LH
  1. Install the snap ring to the vertical seat adjuster knob.



    B166938
  1. Install the vertical seat adjuster knob to the front seat.



5. INSTALL VERTICAL ADJUSTING HANDLE LH (for 8 Way Seat)


    B165520
  1. Install the vertical adjusting handle with the 2 screws.



    B165519
  1. Attach the 2 claws to install the vertical adjusting handle cap.



6. INSTALL FRONT SEAT ASSEMBLY LH (for 8 Way Seat)
  1. Install the front seat (Click here).