Home › BODY › WINDSHIELD / WINDOWGLASS › REAR POWER WINDOW SWITCH

REAR POWER WINDOW SWITCH > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.



1. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY


    B167332
  1. Attach the 2 claws to install the regulator switch.



2. INSTALL REAR UPPER DOOR ARMREST BASE PANEL LH


    B167334
  1. Connect the connector.



    B167333
  1. Attach the 2 clips and 5 claws to install the rear upper door armrest base panel.