CAMSHAFT OIL CONTROL VALVE > ON-VEHICLE INSPECTION |
| 1. INSPECT CAMSHAFT OIL CONTROL VALVE |
Connect the Techstream to the DLC3.
Start the engine and turn the tester ON.
Warm up the engine.
Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT System (Bank 1) or Control the VVT System (Bank 2).
Check the engine speed while operating the Oil Control Valve (OCV) using the tester.
| Tester Operation | Specified Condition |
| OCV OFF | Normal engine speed |
| OCV ON | Soon after OCV switched from OFF to ON, engine idles roughly or stalls |