Home › DRIVE LINE › JF1A TRANSFER › 4WD CONTROL SWITCH

4WD CONTROL SWITCH > REMOVAL

for Preparation Click here



1. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    E145052
  1. Detach the 4 claws.



    E145049
  1. for Column Shift Type:
    Move the shift lever to the S position.

  1. Detach the 12 clips.

  1. Disconnect the connectors and clamps.



  1. Remove the wire harness from the slots, and then remove the finish panel.


    E145053E01



2. REMOVE 4WD CONTROL SWITCH


    C159796
  1. Detach the 3 claws to remove the switch.