REAR SEAT ASSEMBLY (for CrewMax LH Side) > REASSEMBLY |
| 1. INSTALL SEAT LOCK CONTROL CABLE SUB-ASSEMBLY LH |
![]() |
Install the control cable to the seatback frame.
Connect the 2 cables.
| 2. INSTALL CENTER REAR SEAT OUTER BELT ASSEMBLY |
![]() |
Install the outer belt with the bolt and nut.
Install the belt sensor with the 3 nuts.
| 3. INSTALL REAR SEAT SHOULDER BELT HOLE COVER |
![]() |
Install the seat belt as shown in the illustration.
![]() |
Install the cover with the screw.
| 4. INSTALL INNER SEAT TRACK REINFORCEMENT LH |
Install the reinforcement with the 2 bolts.
| 5. INSTALL REAR SEAT CUSHION SUPPORT ASSEMBLY |
![]() |
Install the cushion support with the 6 nuts.
| 6. INSTALL INNER REAR SEAT TRACK BRACKET COVER |
![]() |
Install the cover with the screw.
| 7. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY LH |
Install the seatback frame.
Using a T55 "TORX" socket, install the 2 bolts.
Using a T45 "TORX" socket, install the 3 bolts.
Install the bolt.

| 8. INSTALL REAR SEAT CUSHION MOULDING LH |
![]() |
Attach the 2 claws to install the moulding.
Install the 3 screws.
| 9. INSTALL RECLINING ADJUSTER INSIDE COVER LH |
![]() |
Attach the claw to install the cover.
Install the 2 screws.
| 10. INSTALL REAR SEAT RECLINING COVER INNER LH |
![]() |
Attach the 2 claws to install the cover.
Install the screw.
| 11. INSTALL REAR SEATBACK HINGE COVER |
![]() |
Install the cover with the 2 screws.
| 12. INSTALL CENTER RECLINING ADJUSTER INSIDE COVER |
![]() |
Attach the claw and hook to install the cover.
Install the 2 screws.
| 13. INSTALL REAR SEAT CUSHION SPRING ASSEMBLY LH |
Install the 3 bushes to the cushion spring. Then using a T45 "TORX" socket, install the 3 bolts.
Install the 3 bolts.

| 14. INSTALL CENTER UPPER LINK COVER |
![]() |
Attach the 2 claws in the order shown in the illustration to install the cover.
Install the screw.
| 15. INSTALL SEPARATE TYPE REAR SEATBACK COVER LH |
Using hog ring pliers, install the seatback cover to the seatback pad with new hog rings.
| 16. INSTALL REAR SEATBACK COVER WITH PAD LH |
Using hog ring pliers, install the seatback cover (with pad) with new hog rings.

Attach the hooks to the seatback frame.

![]() |
Attach the 4 claws to install the bezel.
| 17. INSTALL LOWER REAR SEATBACK COVER SUB-ASSEMBLY LH |
![]() |
Using hog ring pliers, install the seatback cover with new hog rings.
| 18. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH |
![]() |
Connect the cable in the order shown in the illustration to install the lever.
![]() |
Install the 2 screws.
| 19. INSTALL REAR SEATBACK LOCK STRIKER COVER LH |
![]() |
Attach the 2 claws to install the cover.
| 20. INSTALL REAR SEAT HEADREST SUPPORT |
![]() |
Attach the 8 claws to install the 4 supports as shown in the illustration.
| 21. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY |
| 22. INSTALL REAR SEAT HEADREST ASSEMBLY LH |
| 23. INSTALL REAR SEAT ARMREST ASSEMBLY |
![]() |
Install the armrest with the 3 nuts.
| 24. INSTALL REAR SEATBACK COVER |
![]() |
Attach the 8 claws to install the 2 covers.
| 25. INSTALL REAR SEATBACK BOARD LH |
![]() |
Attach the 5 clips to install the seatback board.
Install the 4 screws.
| 26. INSTALL REAR SEAT INNER BELT ASSEMBLY LH |
![]() |
Pass the seat belt through the seatback hole.
| 27. INSTALL REAR SEAT CUSHION MOULDING REAR RH |
![]() |
Attach the 2 claws in the order shown in the illustration to install the moulding.
Install the screw.
| 28. INSTALL REAR SEAT CUSHION MOULDING REAR LH |
![]() |
Attach the 2 claws in the order shown in the illustration to install the moulding.
Install the screw.
| 29. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER LH |
Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.
| 30. INSTALL REAR SEAT CUSHION COVER WITH PAD LH |
Attach the hooks to install the seat cushion cover (with pad).
Install the seat belts with the bolt.

![]() |
Using hog ring pliers, install the rubber band of the seatback cover to the seat frame with new hog rings.