Home › BODY ELECTRICAL › AUDIO / VISUAL › REAR DOOR SPEAKER (for CrewMax)

REAR DOOR SPEAKER (for CrewMax) > INSPECTION

for Preparation Click here



1. INSPECT REAR NO. 1 SPEAKER ASSEMBLY (for Standard)


E144966E02
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    3.2 to 4.8 Ω

    If the result is not as specified, replace the speaker assembly.



2. INSPECT REAR NO. 1 SPEAKER ASSEMBLY (for 12 Speakers)


E144966E02
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    1.5 to 2.1 Ω

    If the result is not as specified, replace the speaker assembly.



3. INSPECT REAR NO. 2 SPEAKER ASSEMBLY (for 12 Speakers)


E146499E03
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    2.5 to 3.5 Ω

    If the result is not as specified, replace the speaker assembly.