POWER OUTLET SOCKET (for CrewMax Floor Shift Type) > INSTALLATION |
| 1. INSTALL REAR POWER POINT SOCKET (for AC Power Supply) |
![]() |
Attach the 2 claws to install the power outlet socket.
| 2. INSTALL REAR POWER OUTLET SOCKET COVER (for Standard) |
![]() |
Attach the 2 claws to install the power outlet socket cover.
| 3. INSTALL REAR POWER OUTLET SOCKET (for Standard) |
![]() |
Attach the claw to install the power outlet socket.
| 4. INSTALL CONSOLE BOX BEZEL |
![]() |
for AC Power Supply:
Connect the clamp.
Install the bezel with the 3 screws.
| 5. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY |
![]() |
except Regular Cab:
Connect the connector.
Attach the 7 clips to install the end panel.