Home › BODY ELECTRICAL › OTHER SYSTEM › POWER OUTLET SOCKET (for CrewMax Floor Shift Type)

POWER OUTLET SOCKET (for CrewMax Floor Shift Type) > REMOVAL

for Preparation Click here



1. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY


    B161744
  1. Using a moulding remover, detach the 7 clips and remove the end panel.

  1. except Regular Cab:
    Disconnect the connector.



2. REMOVE CONSOLE BOX BEZEL


B171169E01
  1. for AC Power Supply:
    Disconnect the clamp.

  1. Remove the 3 screws and bezel.



3. REMOVE REAR POWER OUTLET SOCKET (for Standard)


    B171158
  1. Detach the claw and remove the power outlet socket.



4. REMOVE REAR POWER OUTLET SOCKET COVER (for Standard)


    B170311
  1. Detach the 2 claws and remove the power outlet socket cover.



5. REMOVE REAR POWER POINT SOCKET (for AC Power Supply)


    B170309
  1. Detach the 2 claws and remove the power outlet socket.