Home › BODY › SLIDING ROOF › SLIDING ROOF SWITCH ASSEMBLY (for CrewMax)

SLIDING ROOF SWITCH ASSEMBLY (for CrewMax) > REMOVAL

for Preparation Click here



1. REMOVE ROOF CONSOLE BOX ASSEMBLY
  1. for Short Type:
    Remove the roof console box .

  1. for Long Type:
    Remove the roof console box .



2. REMOVE SLIDING ROOF SWITCH


    B171161
  1. Disconnect the 2 connectors.

  1. Detach the clamp.

  1. Remove the 7 screws and lighting housing (upper side).



    B171160
  1. Detach the 4 claws and remove the sliding roof switch.