VOLTAGE INVERTER (for CrewMax) > INSTALLATION |
| 1. INSTALL VOLTAGE INVERTER ASSEMBLY |
![]() |
Connect the voltage inverter connector.
Install the voltage inverter with the 2 bolts.
| 2. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY LH |
![]() |
Attach the 4 clips to install the quarter trim panel.
![]() |
Install the outer lap belt anchor with the bolt.
![]() |
Attach the 2 claws to install the cover.
| 3. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH |
| 4. INSTALL REAR DOOR SCUFF PLATE LH |
![]() |
Attach the 8 claws and 2 clips to install the scuff plate.
| 5. INSTALL BACK PANEL TRIM LH |
Attach the 8 clips to install the back panel trim.
Install the package holder net hook.

| 6. INSTALL BACK PANEL TRIM RH |
![]() |
Attach the 8 clips to install the back panel trim.
Install the package holder net hook.