Home › BODY ELECTRICAL › OTHER SYSTEM › VOLTAGE INVERTER (for CrewMax)

VOLTAGE INVERTER (for CrewMax) > REMOVAL

for Preparation Click here



1. REMOVE BACK PANEL TRIM LH
  1. Remove the package holder net hook.



  1. Detach the 8 clips and remove the back panel trim.


    B170105E03



2. REMOVE BACK PANEL TRIM RH


B169224E03
  1. Remove the package holder net hook.

  1. Detach the 8 clips and remove the back panel trim.



3. REMOVE REAR DOOR SCUFF PLATE LH


B169218
  1. Detach the 8 claws and 2 clips, and remove the scuff plate.



4. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH


5. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY LH


B165830
  1. Detach the 2 claws and remove the cover.



    B165831
  1. Remove the bolt and outer lap belt anchor.



    B169212
  1. Detach the 4 clips and remove the quarter trim panel.



6. REMOVE VOLTAGE INVERTER ASSEMBLY


    B170298E01
  1. Remove the 2 bolts.

  1. Disconnect the voltage inverter connector and removal the voltage inverter.