Home › BODY ELECTRICAL › LIGHTING › PERSONAL LIGHT ASSEMBLY (for Outer Rear View Mirror)

PERSONAL LIGHT ASSEMBLY (for Outer Rear View Mirror) > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the LH side and RH side.
  2. The procedure listed below are for the LH side.



1. INSTALL OUTER MIRROR LIGHT ASSEMBLY LH


    E139768
  1. Attach the 2 claws to install the light.

  1. Connect the 2 connectors.



2. INSTALL OUTER REAR VIEW MIRROR SUB-ASSEMBLY


B167460
  1. w/ Mirror Heater:
    Connect the 2 connectors.



    B167461
  1. w/ Retract Mirror:
    Connect the 3 connectors.



    B166389
  1. Attach the 4 claws to install the outer rear view mirror.

    NOTICE:
    Push the mirror downward until a "snap" sound is heard.