Home › ENGINE ยท 1GR-FE › FUEL › FUEL PUMP

FUEL PUMP > REASSEMBLY

for Preparation Click here


HINT:
Perform "Inspection After Repairs" after replacing the fuel pump (Click here).



1. INSTALL FUEL PUMP

HINT:
Perform "Inspection After Repairs" after replacing the fuel pump (Click here).

  1. Install the fuel pump harness.



    A152234E02
  1. Apply a light coat of gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.
    Text in Illustration 
    *1
    New O-Ring
    *2
    Spacer

  1. Attach the 5 claws to the claw holes to install the fuel pump and suction plate with filter.



2. INSTALL SUB TANK SUB-ASSEMBLY
  1. Attach the 2 claws to the claw holes to install the fuel sub tank.

  1. Attach the 3 claws to the claw holes.

  1. Connect the fuel tube.



    A241733
  1. Install the tube part to the sub tank.

    1. Attach the claw on the end of the tube to the claw hole. Install the tube to the 2 clamps on the fuel sub tank.

  1. Connect the fuel pump connector.



3. INSTALL FUEL SENDER GAUGE


    A241170
  1. Set the sender gauge on the fuel sub tank. Then slide the sender gauge downward to install it.
    Text in Illustration 
    V100135
    Slide

  1. Connect the fuel sender gauge connector.