FUEL PUMP > DISASSEMBLY |
| 1. REMOVE FUEL SENDER GAUGE |
![]() |
Disconnect the fuel sender gauge connector.
![]() |
Press down on the sender gauge claw labeled A. Then slide the sender gauge upward to remove it.
![]() | Press down |
![]() | Slide |
| 2. REMOVE SUB TANK SUB-ASSEMBLY |
![]() |
Disconnect the fuel pump connector.
![]() |
Using a small screwdriver, detach the claw on the end of the tube from the claw hole. Disconnect the tube from the 2 clamps.
![]() |
Disconnect the fuel tube.
![]() |
Using a screwdriver, detach the 3 claws from the claw holes.
![]() |
Using a screwdriver, detach the 2 claws from the claw holes and remove the sub tank.
| 3. REMOVE FUEL PUMP |
![]() |
Using a screwdriver, detach the 5 claws from the claw holes and disconnect the fuel pump from the suction plate with filter.
![]() |
Remove the fuel pump harness.
![]() |
Remove the O-ring and spacer from the fuel pump.
| *1 | O-Ring |
| *2 | Spacer |