Home › BODY ELECTRICAL › WIPER AND WASHER › WASHER MOTOR

WASHER MOTOR > REMOVAL

for Preparation Click here



1. REMOVE WINDSHIELD WASHER JAR ASSEMBLY


    E146312
  1. Disconnect the connector.

  1. Remove the clip and 3 bolts. Then remove the washer jar.



2. DRAIN WASHER FLUID


    E146311
  1. Remove the washer hose from the windshield washer motor and pump, and drain the washer fluid.



3. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    E146313
  1. Pull out the washer motor and pump from the packing of the washer jar to remove it.